• assets/images/8/Header_Material-cc90aed9.jpg
  • Home
  • Retreading material and accessories

K_Side

The use of K_Side technology significantly enhances the retreaded tyre with a look comparable to the new tyre. Due to the interchangeable labeling fields, the sidewall can be designed individually.

As a result of the specially developed temperature-resistant rubber compound for the sidewall matrice, high endurance can be achieved.

K_Side is available in two variants: BASIC and PREMIUM

 

K_SIDE VERSIONS ARE AVAILABLE IN THE FOLLOWING TYRE DIMENSIONS:

  • 275/70 R22.5
  • 295/80 R 22.5
  • 315/70 R 22.5
  • 315/80 R 22.5
  • 385/65 R 22.5

K_Wide

GUARANTEED ONE STEP WIDER

Carcasses of steering axle tires, especially with heavy shoulder abrasion or open shoulder décor, have a limited covering width after roughening compared to the drive tire. In cooperation with VMI-AZ, a technology has been developed that enables shoulder widening by up to 25 mm. This requires a CTC extruder with a K_wide expansion kit.

We have developed a special construction material for shoulder extension: AK01.
Only this material optimally combines the requirements of a standard binding rubber with those of shoulder construction, as required for the K_wide process. KRAIBURG AK01 build-up material is available in previous dimensions as a feeding strip and replaces the normal binding rubber for the CTC extruder even if no shoulder construction is carried out.

Extensive tests have confirmed
that cold-retreaded tires with K_wide Technology meet both the product testing specifications according to ECE-R 109 and the dynamic requirements in use.

Note: maximum installation width 25 mm

 

WE RECOMMEND THE USE OF K_WIDE TECHNOLOGY PRIMARILY FOR DRIVE TIRES OF THE FOLLOWING SIZES:

  • 315/80 R22.5
  • 315/70 R22.5
  • 305/70 R22.5
  • 295/80 R22.5
  • 275/70 R22.5

KRAIBURG Austria GmbH & Co. KG
Webersdorf 11
5132 Geretsberg | Austria
Tel.: +43 7748 7241-0
Fax: +43 7748 7241-11